CABLES TO GO 26886-18in Port Authority USB Serial DB9 Adapter Cable
Product Description
PORT AUTHORITY USB SERIAL DB9 ADAPTER
Great for PDAs and digital cameras! Convert DB9 serial devices to USB with this 9 pin to USB adapter.
Features:
The USB to DB9 Serial Adapter provides the connection between USB and the traditional RS-232 serial port. The adapter is designed for connections to Cellular phone, PDA, digital cameras, modems, or ISDN terminal adapters through your USB port with over 230 kbps data transfer rate. Since the adapter uses no IRQs, it is perfect if you need many serial devices attached to your PC.
* Connectors: One USB A to DB9 Male
* Cable length: 13 inches
* Supports automatic handshake mode
* Over 230kbps data transfer rate
* Supports remote wake-up and power management
* 96 byte buffer each for upstream and downstream data flow
* Easy installation
* Works with cellular phones, PDA, digital cameras, modems, and ISDN terminal adapters
* Frees your RS-232 ports for other uses
* No IRQs, no IRQ conflicts
System Requirements:
* IBM – Compatible PC
* Pentium processor 200MHz or above
* CD-Rom Drive
* Available USB Port
* Windows 98SE/ME/2000 XP
* Color: Blue
* Weight: 0.35lbs
CABLES TO GO 29342-USB Superbooster Wall Plate Kit
August 12, 2009
CABLES TO GO 29342-USB Superbooster Wall Plate Kit
Product Description
USB SUPERBOOSTER WALL PLATE
Decora®-style wall plate with an integrated transmitter/receiver extends a USB signal up to 150ft over cat5
Product Features
Conquer USB length limitations and place your USB devices where you want them with the patent-pending USB SuperBooster Wall Plate from World of Cables. This wall plate solution extends the distance of a USB device to a host computer up to 150ft so you can place your USB projector, camera, printer, or any other USB device exactly where you want it! The USB SuperBooster Wall Plate is powerful yet simple, with no drivers to install or special software required. It is compatible with any computer that supports USB.
This plug-and-play device consists of a transmitter unit and receiver unit incorporated into two, single gang Decora®-compatible wall plates. The transmitter/receiver pair is connected via standard cat5, cat5E, or cat6 UTP cable, allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices and any other facility where you don’t want unsightly visible cables lying around. Use pre-terminated network cables or pull unterminated cable and use the tool-less IDC RJ45 connectors which are included. The USB SuperBooster Wall Plate is also a self-powered device, so no external power source is required.
Features:
* Extends the functional distance of a USB signal, allowing a USB device to function with a USB-enabled computer up to 150ft away
* Ideal for use with USB projectors, interactive whiteboards, cameras, printers, web cams, hubs, or any other USB device
* Wall plates fit standard J-boxes
* Compatible with Leviton Decora® brand cover plates
* Self-powered so no external power source is required
* Uses standard cat5/cat5E/cat6 patch cords (not included), allowing for easy use and flexibility
* Includes tool-less IDC RJ45 connectors, allowing you to terminate your own cable
* Compliant with USB Specification 1.1
* Connectors:
o Transmitter: Input: USB Type B Female; Output: RJ45 Female
o Receiver: Input: RJ45 Female; Output: USB Type A Female
Package Contents
* USB SuperBooster Wall Plate Transmitter Unit
* USB SuperBooster Wall Plate Receiver Unit
* Two RJ45 tool-less IDC connectors
* Four #6×32 slotted/phillips screws
* User Guide
Product Specifications
Warranty: 1 Year
Color: White
Mfr: World of Cables
Weight: .64lbs
CABLES TO GO 18459-USB 2.0 4-Port Laptop Hub with LED Cable
August 11, 2009
CABLES TO GO 18459-USB 2.0 4-Port Laptop Hub with LED Cable
USB 2.0 4-PORT LAPTOP HUB WITH LED CABLE
Add the additional USB 2.0 ports you need to your laptop or pc!
Features:
The trade-off between functionality and portability is all too common for laptop users. USB helps alleviate this problem, but most laptops have only one built-in USB port. We bring you a stylish solution to your USB 2.0 port needs. The USB 2.0 4-port Laptop hub expands your USB configuration and provides three extra ports for connecting peripherals. Small, lightweight and portable, the Laptop Hub can be readily used anywhere you go. Since it easily stores in your notebook case or pocket, this hub is ideal for people on the go. It’s fully USB 2.0 compliant to ensure compatibility with all USB peripherals, regardless of computer manufacturer or operating system. The LED indicator on the cable shows your hub is being powered, while the flip-up plastic cover protects your ports while not in use.
* Connectors: Four-A device ports, one-upstream port
* Fully compatible with USB enabled Macs and PCs
* Bus powered to eliminate the need for an additional power supply
* Fully USB 2.0 compliant to ensure compatibility with all your USB peripherals
* Transfer rates of up to 480 Mbps
* No software required
* Flip-up plastic cover protects your ports when not in use
* Ideal for keyboards, mice and other low power USB devices
* 18in connector cable w/ blue led indicator
Specifications:
* Color: Blue
* Size: 2×1.5×1 in
* Weight: 0.23lbs
CABLES TO GO 50018-18in Go!Mod Molded Round 2-Device Ultra
ATA133 EIDE Cable – Black
salient features:
Improve airflow in your case while adding a touch of style!
Features:
GO!MOD Molded Round Ultra ATA133 Cables from WorldofCables deliver the performance you demand from your new UDMA IDE drives. The Molded Round Cables minimize clutter therefore adding to increased airflow within your case, which helps to reduce overheating. The slim-line design saves internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters. Not to mention the GO! MOD Molded round cables add style and pizzazz to any case!
The new high-speed UDMA interface allows host computers to send and retrieve data faster removing bottlenecks associated with system performance. The 40-pin, 80-conductor Ultra ATA133 cable permits higher data transmission rates, reduces crosstalk, and improves signal integrity by providing 40 additional ground lines between the 40-pin IDE signal and the ground lines. Ultra ATA133 ribbon cables are designed for use with Ultra 133/100 and Ultra 66 drives, and backwards compatible with Ultra33, IDE/ATAPI hard drives, CD-ROMs, CD-R/CD-RWs, tape drives, zip drives, LS-120s and other IDE/ATAPI devices. Please note: Your burst rates may vary due to cable length, type of drive and controller used.
* Connectors: 80-wire/40-pin IDC Female to Two 80-wire/40-pin IDC Females
* Devices Supported: 2
* Cable Type: Type-B
* Connector Layout: Blue connector: System, Gray connector: Slave connector, Black connector: Master
* Supports Ultra66/100/133 drives
* Ideal for 1U servers and gaming/over-clocked systems
* Perfect for adding style to cases with windowed panels
Specifications:
* Warranty: Lifetime
* Color: Black
* Size: 18 in
* Mfr: WorldofCables
* Weight: 0.32lbs
www worldofcables
CABLES TO GO 40837-75ft SonicWave(TM) Pro-Audio Cable 1/4i
n Male to 1/4in Male
75ft SONICWAVE™ PRO-AUDIO CABLE 1/4in MALE to 1/4in MALE
Features:
Premium 1/4′ instrument cable for systems that demand absolute signal integrity.
SonicWave Pro-Audio 1/4′ instrument cables embody the very pinnacle of contemporary cable design and performance. With design parameters firmly based on science and good engineering principles, SonicWave offers a level of performance far beyond higher priced products. When performance really matters you will find SonicWave is without equal!
We offer the SonicWave family of ¼” instrument cables in coaxial, shielded audio configurations. Coax audio interconnects feature precision 75-Ohm geometry, silver plated, oxygen-free copper (OFC) conductors and a nitrogen-foamed polyethylene dielectric for excellent impedance stability and maximum signal transfer. Our connectors maintain the cable’s integrity from component to component. Impact Acoustics’ CU Shielding Technology™ ensures interference-free transmission of delicate audio signals. The result of this technology is an unprecedented spectral clarity and amazingly low noise floor. SonicWave is ideal for any pro-audiophile application.
* Connect line or mic level outputs from mixing consoles to recorders and amplifiers with unbalanced inputs
* 24K Gold Plating – 24-karat gold-plated pins ensure superior signal transfer between your source devices and mixing console
* Textured Grip – Designed for non-slip insertion and extraction with less marring of the connector shell
* Silver Solder Connectivity – Precise soldering techniques with silver solder to eliminate the negative effects of dissimilar metals
* Flexcable™ PVC Jacket – Ultra flexible, PVC jacket for ease of routing and installation
* CU Shielding Technology™ – Two 80%+ OFC copper braids and one 100% overlapped Mylar® foil provides maximum isolation against EMI and RFI interference
* SPC Oxygen-Free Conductor – Multi-strand 75Ohm high frequency silver-plated oxygen-free copper center conductor for maximum signal integrity
Specifications:
Warranty: Lifetime
Color: Gray
Mfr: Impact Acoustics
Weight: 5.2lbs
www worldofcables
CABLES TO GO 52044-Trulink(TM) 2-Port VGA and PS/2 Micro KVM with Audio
Product Description:
TRULINK™ 2-PORT VGA and PS/2 MICRO KVM with AUDIO
All cables included, nothing more to buy!
Features:
Take control of two PCs and free your desktop from clutter with the 2-Port VGA and PS/2 Micro KVM with Audio from Cables To Go. This powerful, compact KVM solution provides everything you need to control two PCs from a single PS/2 keyboard, monitor, PS/2 mouse, and speaker set. Fully integrated, single jacket, six foot cables attach to your PCs to eliminate tangles and provide a neat, clean appearance. The small footprint of the switch makes it perfect for desktop applications.
The 2-Port PS/2 MicroKVM is small in size but provides big box functionality. It supports video resolutions up to 2048 x 1536 while providing full keyboard and mouse emulation to prevent system lock-ups. With no software required, installation is hassle free – simply connect the cables and power up! Hot key functionality enables you to switch from PC to PC without ever taking your hands off your keyboard. The KVM’s LEDs clearly indicate which system is selected.
Also it is:
* Easy to install – no software required, simply connecting cables to the computers is all it takes
* Easy to operate – PC selection via hotkey and auto scan function to monitor computer operation
* Compact design saves space; all necessary cables are built-in so there is nothing more to buy and no cables to lose
* Built-in 3.5mm speaker jacks for supports audio for multimedia application
* Supports Microsoft IntelliMouse and the scrolling wheel on most mice
* Hot pluggable – add or remove connected PCs for maintenance without powering down
* Switch KVM and audio individually
* LED display for easy status monitoring
* Caps Lock, Num Lock, and Scroll Lock states are saved and restored when switching
* Keyboard and mouse emulation for error free PC booting
* Superior video quality – up to 2048 x 1536; DDC2B
Connectors:
* Console:
o Keyboard: 1 x Mini-Din-6 Female (Purple)
o Video: 1 x HDB-15 Female (Blue)
o Mouse: 1 x Mini-Din-6 Female (Green)
o Audio: 1 x Stereo Earphone Jack Female (Green)
* Computer:
o Keyboard: 2 x Mini-Din-6 Male (Purple)
o Video: 2 x HDB-15 Male (Blue)
o Mouse: 2 x Mini-Din-6 Male (Green)
o Audio: 2 x Stereo Earphone Plugs Male (Green)
Requirements:
* VGA (HD15) monitor
* VGA (HD15) video card
* PS/2 keyboard
* PS/2 mouse
Specifications:
Warranty: 3 years
Color: Grey
Size: 3.5 (W) x4.5 (L) x1.5 (H) in
Mfr: Cables To Go
Weight: 1.51lbs
www worldofcables
Hello world!
June 16, 2009
Welcome to WordPress.com. This is your first post. Edit or delete it and start blogging!
